Our new Director of Technical Sales and Solutions North America brings over 40 years of experience in the electronics industry. Welcome to Stannol!

On 13 May 2025, Inertec Solutions GmbH invites you to the Technology Day in Kreuzwertheim. Our expert Dirk Ruedell will be part of the programme with a technical contribution.

On 7 May, our expert Dr Andreas Sy will be answering all questions relating to his poster session on "Copper Salt-Based Sinter Paste for Use Under Air and Pressureless Conditions".

Our Sustainability Officer Susanne Schlüter represented Stannol at the stakeholder dialogue on the further development of the VSME module included in the German Sustainability Code (DNK).

The Digital Product Passport ensures greater transparency for raw materials and in supply chains. But what framework conditions are required to successfully establish the Digital Product Passport?

Stannol was delighted to receive the Velbert Key Region Environmental Award in 2024. A large part of the prize money has now gone to the Hardenberger Hof kindergarten – in the form of a new…

Dried solder paste residues are particularly stubborn. However, ultrasonic cleaning ensures that even the finest apertures are thoroughly and gently cleaned.

Yesterday, Stannol was featured in the WDR Lokalzeit programme! Managing Director Marco Dörr presented the sustainable orientation of the company. There were also exciting insights into our production…

In mid-February, we had the opportunity to present the Stannol portfolio to our partners Hiflo Solders and Drive Technologies in India.

As part of her master's thesis at Stannol, Merve Tuzcu has intensively analysed the topic of Product Carbon Footprint (PCF) and developed a PCF strategy for the company.

Thomas Ruch from Stannol North America was represented at the Austin Expo & Tech Forum. The valuable exchange and the great interest in our sustainable soldering solutions made the event a complete…

On 4 February, Stannol hosted the "Journey into the Circular Economy" organised by the SME Digital Centre Future Culture initiative.

We have revised our accessories catalogue and added some new products, for example the new Flux-Ex cleaner series.

Hassan Zaid joined our team as IT Manager on 1 June 2024. His main task is currently the introduction of our new ERP software. Welcome to Stannol!

We have brought our tried and tested soldering equipment catalogue up to date! You will find soldering equipment of all kinds, such as soldering irons, soldering guns, gas soldering or woodburning…

An eventful year lies behind us, and we would like to take this special time to thank you for your trust and co-operation!

On 12 December, our Sustainability Manager Susanne Schlüter was part of an impressive ZN³ campaign: together with other members, she planted around 300 trees in the Solingen forest.

We are delighted to once again be able to support the non-profit organisation "Technik für Kinder" with a donation. The organisation is committed to introducing children to the world of technology.

Stannol supported the Start-up Days at the University of Wuppertal in the form of donations: Several Stannol soldering irons were raffled off among the students each day at the wheel of fortune.

At SMTAI in Chicago, Stannol was honoured with the prestigious Global Technology Award for two of its innovative products.

At Stannol, we are actively committed to an open and inclusive corporate culture – which is why we recently hoisted the rainbow flag on our flagpole.

We are pleased to announce that we have successfully completed the re-certification according to IATF 16949:2016!

On 25 and 26 September, our application experts will be exhibiting at IPC Day EMS Europe and TEK Day in Gdansk, Poland.

Welcome to our newly designed centrepiece! What used to be a small, closed room is now an open, inviting meeting place.

Our new website "World of Stannol" is online! It is all about sustainability – from the company's sustainable product development to the most environmentally friendly sourcing of raw materials.

Our newly created outdoor area was officially opened this week. At a relaxed get-together, guests were able to see our blossoming outdoor oasis for themselves.

For the second time, Stannol GmbH & Co. KG has submitted a voluntary sustainability declaration according to the German Sustainability Code (DNK).

Our first Stannol Bike Challenge ended on 31 July with a big surprise – the 18 participants broke the 6,000-kilometre mark with a total of 6,245 km!

For this year's summer party we have chosen a particularly beautiful location: Seaside Beach Baldeneysee.

Stannol has submitted its second voluntary sustainability declaration as part of the German Sustainability Code (DNK).

We are delighted to present our new series of high-performance cleaners at SMTconnect from 11 to 13 June in Nuremberg.

Stannol is expanding its product portfolio with five efficient cleaners. The new Flux-Ex series includes broadband and speciality cleaners that are perfectly tailored to their respective applications.

Stannol is expanding its product portfolio with five efficient cleaners. The new Flux-Ex series includes broadband and speciality cleaners that are perfectly tailored to their respective applications.…

On 14 June, the European Football Championship 2024 will kick off. So why not follow the European Championships together in our prediction game and look forward to the results?

In recent weeks, Stannol has been busy digging and planting: a 1,000 square metre concrete-sealed wasteland has been renaturalised and transformed into a flowering garden.

Stannol published its first voluntary sustainability report according to the German Sustainability Code in 2023. Susanne Schlüter, Assistant to the Management, explains how the company proceeded.

RAFI from Berg near Ravensburg uses Stannol's patented Flowtin solders on its selective soldering systems. The result: solder nozzle service life has been significantly extended.

This year, we are once again supporting the non-profit organisation "Technik für Kinder" with 80 reels of solder wire.

We are delighted that the Velbert/Heiligenhaus Key Region has honoured us with the 2024 Climate Prize!

Our spring promotion this year is completely in line with our commitment to biodiversity: Our customers will receive seedbombs filled with wildflower seeds!

Inertec is holding its Technology Days on 24 and 25 April. Our application engineer Dirk Rüdell will join in with a presentation on special solders and fluxes.

Last November, some hard-working colleagues volunteered to help build an insect hotel for the local branch of the "Bund Naturschutz".

We are delighted to present our innovative and particularly sustainable solder paste SP6000 for the first time at Productronica Shanghai!

The associations VDE, VDI and DVS invite you to the EBL (Electronic Assemblies and Printed Circuit Boards) trade event in Fellbach on 5 and 6 March 2024. Stannol is taking part as an exhibitor!

Stannol is now reporting the Product Carbon Footprint (PCF) for over 1,600 manufacturing products, i.e. for almost 100 percent of the goods it produces itself.

Stannol has donated the prize money from the Efficiency Award NRW 2023 to the regional "Taschenfüller" (pocket filler) project.

We are pleased that our GEN3 expert Nicolas Wiacker will be attending the event "Seminar on Humidity Robustness and Insulation Coordination for e-Mobility" on 1 February 2024 in Ingolstadt.

Stannol was awarded the Efficiency Award NRW 2023 on 6 December. We are delighted that the regional TV station WDR took this as an opportunity to film a report about Stannol.

Stannol has been honoured with the Efficiency Award NRW 2023 for its more sustainable greenconnect product line and its overall sustainable concept.

It is with great sadness that we announce that Karl-Heinz Dörr passed away on Saturday, 2 December 2023, at the age of 76, after bravely battling a long-term illness.

Stannol is looking forward to welcoming you at Productronica 2023 in Munich! Together with our partners GEN3 Systems and Ibil Laser, we present current trends and new products.

Productronica, the world's leading trade fair for the development and production of electronics, will take place in Munich from 14 to 17 November 2023. We'll be there!

We are pleased to welcome Jean-Emmanuel Lechene as Stannol's new Area Sales Manager for France and North Africa.

Stannol is presenting the new SP6000 solder paste at Productronica 2023 in Munich. The special feature: With the solder paste, more than 85 percent of CO₂ emissions can be saved.

Stannol is pleased to welcome you at the FED Conference in Augsburg! Ingo Lomp, Head of Innovation, and Product Manager Nicolas Wiacker will be on site to present our innovative products.

On 26.10.2023 Stannol invites you to Evertiq Expo – the networking event for the electronics industry in Warsaw.

Product Manager Nicolas Wiacker explains how the envelope curve can be created quickly and easily with the help of our temperature profiler.

On 7 September, Stannol invites you to the EMS Day – the event for managers, in-house manufacturers and suppliers in the electronics industry.

Dirk Rüdell joined the Stannol team as product manager on 1 April 2023.

Ingo Lomp and Dan Mutschler discuss methods for recycling solder tin waste in the latest EPP podcast.

Last Friday, Stannol celebrated this year's summer party at the Velbert site in bright sunshine.

We are pleased that Stannol continues to meet the requirements of IATF 16949:2016 (Quality Management) and ISO 14001 (Environmental Management).

We are pleased to announce that Iljan Sandstedt has joined the Stannol team in the area of technical sales/application technology as of 1 July 2023.

Stannol is one of the first companies in the solder industry to submit a voluntary sustainability declaration within the framework of the German Sustainability Code (DNK).

From 26 to 28 September, Stannol, together with other partners, once again invites you to the expert seminar "WGiT – Wir gehen in die Tiefe" in Dresden.

With more than 400 km in just under three weeks, he became group winner of the Stannol team in Velbert.

On 14. and 15.06.23, the "Green Electronics" specialist forum will be held at Zeche Zollverein on the subject of sustainability in the electronics industry.

When handling solder pastes, there are a number of things to consider in everyday production. W. Kolb Fertigungstechnik GmbH uses Stannol's Smart Warehouse for the digital management of its products.

Stannol has successfully completed an EU-funded project on tin recycling. It was scientifically proven that primary and secondary tin do not differ in purity and quality.

After 50 years, Karl-Heinz Dörr retires in March 2023. We are grateful for his commitment and expertise.

As part of an EU project, Stannol has joined forces with four partners to research how used solder paste can be reprocessed without loss of quality using new, resource-saving processes.

On June 14 and 15, 2023, the companies kolb Cleaning Technology, MTM Ruhrzinn and Stannol invite you to "Green Electronics" – an event all about sustainability in the electronics industry.

This year, Stannol is once again offering new online seminars on various aspects of soldering technology.

The Lökast team has taken over the distribution of Doris Pelzer Industrievertretung in Baden-Württemberg.

Due to a change in the IPC J-STD-001 standard, there are innovations around the detection of ionic residues on process materials.

The Spanish company Ibil Laser has already been part of Stannol's distributor team since the beginning of 2021. Now the two companies have further deepened their partnership.

The Corona pandemic has posed major challenges for companies worldwide. How did Stannol cope with the crisis? Marco Dörr and Herbert Schmidt in our interview.

Stannol has taken the lead on an EU-funded project. The project deals with innovative possibilities around the topic of recycling solder material.

The Stannol solder paste SP2300 is particularly suitable as type 5 (15-25 µm) for use around smaller components.

In spring 2022, Kolb switched its entire THT production to Stannol's sustainable greenconnect range.

We are pleased to have ADL Prozesstechnik as our new distributor, who will mainly distribute Stannol's products for the eastern states of Germany.

The solderability of printed circuit boards should be checked in advance. Solderability testing by wetting balance tests can provide reliable support.

SIR tests provide information on whether the flux used is electrically safe. Stannol tests according to the strict IPC J-STD-004C standard.

The use of renewable raw materials achieves a better eco-balance than conventional fluxes – while maintaining consistently high product quality.