Solder Paste SP6000
The solder paste SP6000 is part of Stannol's more sustainable greenconnect product line. The special feature: With SP6000, more than 85 percent of CO2 emissions can be saved compared to conventional solder pastes mainly through the use of recycled solder.The solder paste was developed for use with the alloy TSC305 (Sn96.5Ag3Cu0.5) as well as for cost-saving use with low silver content with the alloy TSC105 (Sn98.5Ag1Cu0.5). With SP6000, a very good first print is possible even after a long period of printer downtime.
The flux, which is classified as REL0, also convinces with an uncompromising wetting quality on all known lead-free PCBs and component coatings in both air and nitrogen atmospheres.
Product Advantages
- solder powder made from recycled solder
- more than 85 percent CO2 savings
- suitable for use with low silver content (TSC105)
- high contour stability, suitable for fine pitch up to 0.4 mm
- very good first print results after longer printer downtime
- reflow soldering process under air or nitrogen possible
- low mid-chip balling on passive components due to anti-capillary effect
- very good wetting on most surfaces
- RoHS-compliant
Application
Solder paste SP6000 was developed for stencil printing. With the TSC105 or TSC305 alloy as solder powder in particle size 3 (25 to 45 µm) and 4 (20 to 38 ?m), solder paste SP6000 can be used in all common open and closed printing systems.
Available Delivery Forms
Contact person
Do you have any questions about our products?
Our application engineers will be happy to help you. Contact us, we are here for you!
Distribution Network
Further countries with our distributors' contacts can be found here:
Distribution Network